Menu Navigation And Structure - IKA IC control Mode D'emploi

• Menu navigation and structure:

Menu navigation
Control elements for
Fig. 24
menu navigation
Note: When the tempering or pump functions are active, the menu is locked. On the display, the active menu option is
highlighted in yellow. The active status of a menu item is marked with a check (√).
Menu navigation:  Press the "Menu" key (M) and rotate rotating/pressing knob (J)
 Press the "Back" key (N) or the "Menu" key (M)
A
Menu
0.00
int °C
ext °C Safe Temp °C
Back
int 0.00 1000
set °C Pump rpm
Note: If you press the "Menu" key (M), the system skips directly back to the working screen.
If you press the "Back" key (N), the system skips back to the previous screen.
Fig. 25
Press the "Menu" key (M).

Select the menu by turning the right rotating/pressing knob (J) to the right

or left.
M
Open the menu item by pressing the right rotating/pressing knob (J).

N
Turn the rotating/pressing knob (J) to select the desired menu option and edit

the values or settings.
Press the rotating/pressing knob (J) to get into sub menu items to active/inac-

tive to switch settings or to confirm settings ("OK").
J
Press the "Back" button (N) to a setting or cancel to return to the previous

menu.
Press the "Menu" button (M) to return directly to the working screen.

MENU
Back
TEMPERING
Menu
Heating > Heating
Control
Control Control Mode
Limits Control Parameters
Temperature Sensor Fluids
Back
> Heating > Control
Control Mode
Internal (int)
External (ext)
Back
40