Connecting The Instrument To An Endometer - Sendoline S1-E Notice D'utilisation

Operating Instructions S1-E / S1-A
65 67 460 D3643.201.01.01.02
5.4

Connecting the instrument to an endometer

The S1-E / S1-A makes it possible to connect a measuring cable for an
endometer by means of a clip in order to check the exact position of the
file in the root canal.
NOTICE! Use only endometers, which are approved in the respective
Endometer with approval for respective country SIRONiTi /E-Drive
country.
1. Please observe the operating instructions pertaining to the
endometer being used.
2. Attach an APEX clip [ → 24].
3. Connect the measuring cable of the endometer to the clip's contact
pin.
4. Perform the measurement in accordance with the equipment
manufacturer's specifications.
5 Operation
25