Mounting And Removing The Insulating Sleeve - Sendoline S1-E Notice D'utilisation

Operating Instructions S1-E / S1-A
5 Operation
5.6

Mounting and removing the insulating sleeve

NOTICE! Insulating sleeves are only used once. Change the insulating
sleeve after each patient.
Fitting an insulating sleeve
✔ You have sterilized the insulating sleeve.
Mounting _ File
✔ The motor is at a standstill.
✔ A file is not clamped in place.
1. Twist the insulating sleeve carefully this way and that and pull the
insulating sleeve fully over the instrument.
2. Attach the file [ → 22].
Removing an insulating sleeve
✔ The motor is at a standstill.
Removing _ File
1. Remove the file.
29
65 67 460 D3643.201.01.01.02