Using Your Neato Robot Without The Neato App - Neato botvac D7 connected Mode D'emploi

Using Your Neato Robot Without the Neato App

HOUSE CLEANING
You can initiate House
Cleaning by pressing the
Start Button once. Your
Neato robot will clean the
entire floor on one level
automatically moving
from room to room.
* "No-Go" Lines are not available unless
you use the Neato app to start a clean.
HOUSE CLEAN
ACTION
Start Press Start Button 1x for
Cleaning house cleaning
Press Start Button 2x for
spot cleaning
Pause/ Press Start Button during
Resume cleaning to pause robot
Cleaning
Press Start Button again
to resume cleaning
Cancel Press & hold Start Button
Cleaning for 5 seconds
* NOTE: if the House or Spot Clean LED light is blinking red or solid red, your
robot needs robot maintenance or your robot has a navigation issue. Please
check the troubleshooting section of this guide.
SPOT CLEANING
You can initiate Spot Cleaning
by pressing the Start Button
twice. During Spot Cleaning,
if you press the Start Button,
Press the
the robot will pause. If you
Start Button 1 x
press it again, it will resume.
for House Cleaning,
2 x for Spot
To cancel the Spot Cleaning,
Cleaning
pause the robot and hold down
the Start Button for 5 seconds.
and SPOT CLEAN
HOUSE CLEAN LED SPOT CLEAN LED
Solid Blue
Solid Blue
Pulses while paused Pulses while paused in
in House Clean Spot Clean
Solid Blue Solid Blue
Robot & LEDs turn off Robot & LEDs turn off
& robot plays a tone & robot plays a tone
Place your robot
centered and
facing the area
to be cleaned.
LEDs BATTERY LED
ROBOT IS: LED COLOR
Solid Green
Solid Yellow
Cleaning
Solid Red
Green (Solid
or pulsing)
Pulsing
Charging
Yellow
Pulsing Red
* If Blinking Red, please check the troubleshooting section of this guide.
FEATURES ONLY AVAILABLE
VIA THE NEATO APP
Some features are only available if you
connect your robot to the Neato app on
your smartphone or tablet. These features
include Neato FloorPlanner, scheduling, push
notifications, context-sensitive help, and
cleaning statistics (specific models only).
WHAT IT MEANS
Battery level is normal
Battery level is low and must be charged before a new
cleaning can be started
Battery level is low and robot must return to charge base
Battery is charging and robot can start cleaning
Robot is fast-charging the battery and must complete
before cleaning can start
Battery level is low and must be charged before a new
cleaning can be started
English
11