Publicité
Les langues disponibles
Les langues disponibles
Thank you for purchasing the
balance, which is computerized with a high performance microprocessor and specialized operating software.
Please read this entire operating manual completely and attentively as it contains a wide variety of specific
programming and safety information.
SPECIFICATIONS
Operating voltage range: AC100.0 - 240.0 Volt
Circuit power: Max. charge power 60W
Max. discharge power 10W
Charge current range: 0.1 ~ 6.0A
Discharge current range: 0.1 ~ 2.0A
Current drain for balancing Li-po: 300mAh/cell
NiCd/NiMH battery cell count: 8 Cells
Lithium battery cell count: 2-4 Series
Pb battery voltage: 6V(3P) - 12V(6P)
Weight: 302g
Dimensions: 115 x 112 x 55mm
FEATURES
Optimized operating software
When charging or discharging, it has an "AUTO" function that sets the feeding current automatically.
Especially for Lithium batteries, it can prevent the over-charging can lead to an explosion by users fault.
Every program in the unit is controlled with mutual links and communication for every possible error so it
introduces a maximum safety. These can be set at users option.
It provides most convenient balance charge port for Lithium batteries, with separated 2,3,4 charge port,
and external reverse connector.
High-power and high-performance circuit
It employs the circuit that has maximum output power of 60W. As a result it can charge or discharge up
to 6 cells of NiCd/NiMH and 4 series of Lithium batteries with maximum current of 6.0A. Furthermore
the cooling system is so efficient that can hold such a power without any trouble of running the CPU or
the operating program.
Internal independent lithium battery balancer
It has an individual-cell-voltage balancer inside. So it does not need any balancer separately when charging
Lithium batteries (Lilon/LiPo/LiFe) for cell voltage balancing.
Balancing individual cells battery discharging
It also can monitor and balance individual cells of the Lithium battery pack during the discharge process. If
the voltage of any one cell varies abnormally, the process will be stopped with the error message.
Adaptable to various types of Lithium battery
It can accept three types of Lithium batteries: Lilon, LiPo and LiFe. They have different characteristics by
their chemistry. You can select any one of them that you are going to process before the job. For their
2
Charger. You get a rapid charger/discharger with a built-in
Publicité
