Publicité
Les langues disponibles
Les langues disponibles
DISCHARGING PB BATTERY
Set discharge current on the left and final voltage on the right. The discharge
Pb[0] DISCHARGE
current ranges from 0.1 to 2.0A.
1.0A
12.0V(6P)
To start the process, press Start/Enter key for more than 3 seconds.
Lithium battery internal resistance is one of the important index about battery
discharge capacity and efficiency. We can know battery performance and the
The screen displays the current state of discharge. You can alter the discharge
matching of each battery by getting the battery resistance value. The lithium
current by pressing Start/Enter key during the process. Once you change the current
battery internal resistance value tested by this charger is relative(not absolute),
value, store it by pressing Start/Enter button again.
which is tested under the testing voltage. But it can also know the battery
To stop discharging press Batt type/Stop key once. The audible sound indicates you
performance and matching through the relative value. If you want more battery
at the end of process.
performance comparison, you had better put them under the same voltage to
detect. For example, to compare two 3-cells batteries, you should ensure that the
total voltage is consistent. Testing in the single voltage of 4.20V, the test data is
MEASURE INTERNAL RESISTANCE PROGRAM PER CELL
smaller the performance better and the data more close to the battery the better
In this program, the charger cannot only measure the internal resistance of the battery pack, and also can
matching nature.
measure the per-cell internal resistance (only available for lithium battery). Plug the balance wire only.
Press « Start » : The battery pack start to measure internal resistance per cell.
Test Lixx Inter-
nal
Resistance
Measuring IR
Wait Please
The two lines shows the first of the four cell's internal resistance, which is only
1: 005mΩ 2: 004mΩ
available for the lithium battery. Press "DEC" or "INC" to display more information.
3: 004mΩ 4: 004mΩ
This screen displays the battery pack internal resistance. Press "DEC" or "INC" to
Battery Pack IR
4mΩ
display the status information.
SAVE / LOAD DATA PROGRAM
Under the battery type interface, press "INC or "DEC" key to select storage number
PROGRAM MEMORY
for quick operation.
LiFe[0]
Press "Enter" to enter, users can set and storage common data, set values will
automatically be saved to corresponding storage number.
Users can store 5 sets common data for each battery type, [0] - [4].
VARIOUS INFORMATION DURING THE PROCESS
You can inquire various information on LCD screen during charging or discharging process. When you press DEC
button the charger shows the establishment of user settings. And also you can monitor the voltage of individual
cell by pressing INC button when the individual connection cable is linked to the Lithium battery being processed.
The final voltage will be reached at the end of process.
Displayed capacity cut-off function is turned on and the setting value of capacity.
10
12
Displayed safety timer is turned on and duration of time in
4
Publicité
