Publicité
Les langues disponibles
Les langues disponibles
10
Displayed temperature cut-off function is turned on.
Ext. Temp
0C
Int. Temp
31C
C1: 3.75
C2:3.75V
C3: 3.76
C4:3.76V
WARNING AND ERROR MESSAGES
It incorporates various functions of protective and monitoring system to verify functions and the state of its
It incorporates a various functions of protective and monitoring the system to
electronics. In any case of occurring error, the screen displays the cause of error that is self-explanatory
verify functions and the state of its electronics. In any case of occurring error, the
with audible sound.
screen displays the cause of error that is self- explanatory with audible sound.
minutes.
The external temperature is displayed when the temperature probe is used. Int
temerature is displayed the internal temperature of changer.
The battery is connected with each port through cable; you can check voltage of
each cell in the battery pack. When the cable is connected with the ports on the
charger, the program will display voltage of up to 4 batteries.
The output is connected to a battery with incorrect polarity.
Battery connection is interrupted.
Short-circuit of the output termination.
The voltage of the battery pack has been selected incorrectly!
The charger has malfunctioned for some reason. Seek professional advice.
The voltage is lower than which is set. Please check the number of cells in the
battery pack.
The voltage is higher than which is set. Please check the number of cells in the
battery pack.
Voltage of one cell in the battery pack is too low, pleasecheck the voltage of each
cell.
Voltage of one cell in the battery pack is too high; please check the voltage of each
cell.
Wrong connection of the connector detected; please check the connector and cable.
The internal temperature of the unit goes too high. Cool down the unit.
13
Publicité
