Connecting The Power Cord (1) - Pioneer AVIC-D3 Manuel D'installation D'usage Et D'entretien

Connecting the System

Connecting the power cord (1)

Note:
Cords for this navigation system and those for other products may be
different colors even if they have the same function. When connecting
this navigation system to another product, refer to the supplied manuals
of both products and connect cords that have the same function.
Yellow
To terminal always supplied
with power regardless of
ignition switch position.
Red
To electric terminal controlled
by ignition switch (12 V DC)
ON/OFF.
Orange/white
To lighting switch terminal.
Black (ground)
To vehicle (metal) body.
Note:
When a subwoofer is connected to this navigation
system instead of a rear speaker, change the rear
output setting in the Initial Setting. (Refer to the
Operation Manual.) The subwoofer output of this
navigation system is monaural.
Front speaker
Left
Rear speaker or
Subwoofer (4Ω)
When using a subwoofer of 70 W (2 Ω), be sure to connect with Violet and Violet/black leads of
this navigation unit. Do not connect anything with Green and Green/black leads.
Not used.
9
White
+
≠
White/black
Green
+
≠
Green/black
Green Violet
Green/black Violet/black
With a 2 speaker system, do not connect
anything to the speaker leads that are not
connected to speakers.
Gray
+
≠
Gray/black
Violet
+
≠
Violet/black
+
Subwoofer (4 Ω)
× 2
≠
Front speaker
Right
Rear speaker or
Subwoofer (4Ω)