NORDIK 15625026 Guide De L'utilisateur page 9

1.
Make sure you have all the necessary parts. If any part is
found missing or damaged, do not attempt to install the
AC. Contact Customer Service for assistance.
Installation kit contents:
1. Platform (1)
2. Support brace (1)
3. Adjustment bolt (1)
4. Hex flange nut - 1/4" (1)
5. Track seal (1)
6. Side channel seal (1)
7. Foam seal strip/sash seal
8. Safety bracket (1)
9-11. Screw - #10 x 2-1/2" flathead (2), OR
Screw - #10 x 1-3/4" pan-head (2), OR
Screw - #10 x 1" pan-head (2)
12. Screw - #8 x 3/4" pan head (6)
13. Screw - #8-32 x 3/4" self-threading (7)
14. Window locking bracket (1)
15. Plastic window panel (1)
16. Side channel (2)
17. Screw - #8 x 3/8 truss head (6)
18. Panel frame/seal assembly (1)
NOTE:
Use the scale below to measure the length of your
screws. The scale will come in handy when
separating screws for installation.
IDENTIFY SCREWS
BY LENGTH
2.
Choose a proper sized window, as shown on the right.
15-1/2" minimum width
16-1/4" maximum width (for
casement windows)
21-1/4" minimum height (with
window panel retainer)
20-5/16" minimum height
(window panel retainer removed)
39-7/16" maximum height
NOTE:
Height measurement must be of a clear
opening above mounting platform. In some cases,
due to a variety of stop and track arrangements, the
above dimensions may vary slightly. If necessary,
installation can be made by alternating window
jambs. (refer to "Alternate Window Jamb Applications")
(continued)
Installation Instructions
(13 mm) (25 mm)
(10 mm) (19 mm) (28 mm) (50 mm)
(44 mm) (63 mm)
7
3
1
2
12
17
4
16
14
15
15 / "
1
2
minimum
width
20 / "
5
16
minimum
height
39 / "
7
16
maximum
height
9, 10, 11
8
13
5
7
6
18
16 / "
1
4
maximum
width
(casement
windows)