Connecting Coolant Recirculator En; Fuse Protection Of The Coolant Recirculator En - Abicor Binzel iROB Cool Mode D'emploi

6 Putting into operation
6.2 Connecting coolant recirculator
6.2.1 Fuse protection of the coolant recirculator
1 6.3x35 2A_T fuse
Fig. 4 Fuse
If the coolant recirculator does not function, check:
• the power supply, if necessary, switch on the iROB Pulse robot welding power source.
• the fuse (1), if necessary, replace the fuse.
EN - 12
1
iROB Cool
1
BAL.0332.0 • 2017-08-31