Bosch GCL 25 Consignes De Fonctionnement/Sécurité page 7

Product Description and Specifications
Please refer to the page with the representation of the measuring tool while reading the operating
instructions.
The measuring tool is intended for determining and checking horizontal and vertical lines as well as
plumb points.
The numbering of the product features shown
refers to the illustration of the measuring tool on
the graphic page.
1 Exit opening for laser beam
2 Operating mode button
3 Battery low indicator
4 On/Off switch
5 Magnets
6 Tripod mount 5/8"
7 Tripod mount 1/4"
8 Latch of battery lid
9 Battery lid
10 Laser warning label
Point and Line Laser
Article number
1
Working range
– Laser lines
– Horizontal point beams
– Point beam, upward
– Point beam, downward
Levelling Accuracy
– Cross line (Up to)
– Horizontal point (front/right/left)
– Vertical point (upwards/downwards)
Self-leveling range, typically
Leveling duration, typically
3
Operating temperature
Storage temperature
Relative air humidity, max.
Laser class
Laser type
C
6
Tripod mount
Batteries
GCL 25 Manual with translations.indd 7
Intended Use
Product Features
11 Serial number
12 Laser viewing glasses*
13 Laser target plate
14 Measuring plate with stand*
15 Universal holder*
16 Tripod*
17 Protective pouch*
* The accessories illustrated or described are not
included as standard delivery.
Technical Data
GCL 25 Professional
3601K66A10
30 ft (10 m)
100 ft (30 m)
30 ft (10 m)
15 ft (5 m)
±1/8 in @ 30 ft (±0.3 mm/m)
±3/8 in @ 100 ft (±0.3 mm/m)
±9/16 in @ 30 ft (±0.5 mm/m)
± 4°
< 4 s
+14°F to +122°F (–10 to +50°C)
-4°F to +158°F (–20 to +70°C)
90%
2
635nm, <1mW
1
5/8"– 11, 1/4"– 20
4 x 1.5v LR06 (AA)
-7-
4/24/12 8:29 AM