Cleaning The Spray Arms; How To Maintain Your Dishwasher - Danby DDW611W Guide D'utilisation

Care and maintenance
CARING FOR THE
DISHWASHER
(cont)

CLEANING THE SPRAY ARMS

The spray arms can be easily removed for periodic cleaning of the noz-
zles, to prevent possible clogging. Wash them under running water and-
carefully replace them in their proper position, checking that their rotary
movement is in no way impeded.
Grasp the middle of the spray arm, pull it upwards to remove it.Wash the
arms under a jet of running water and return them carefully to their posi-
tion. After reassembly, check that the spray arms turn freely.

HOW TO MAINTAIN YOUR DISHWASHER

• After Every Wash
Turn off the water supply to the appliance and leave the door slightly
open so that moisture and odors are not trapped inside.
• Remove the Plug
Before cleaning or performing maintenance, always remove the plug
from the socket.
• No Solvents or Abrasive Cleaning
To clean the exterior and rubber parts of the dishwasher, do not use
solvents or abrasive cleaning products. Only use a cloth with warm
soapy water. To remove spots or stains from the surface of the interior,
use a cloth dampened with water with a little vinegar, or a cleaning
product made specifically for dishwashers.
• When it is not in use
It is recommend that you run a wash cycle with the dishwasher empty
and then remove the plug from the socket, turn off the water supply and
leave the door of the appliance slightly open. This will help the door
seals last longer and prevent odours from forming within the appliance.
• Seals
One of the factors that cause odors to form in the dishwasher is food that
remains trapped in the seals. Periodic cleaning with a damp sponge will
prevent this from occurring.
19