Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
Care and maintenance
CARING FOR THE
DISHWASHER
(cont.)
CLEANING THE SPRAY ARMS
The spray arms can be easily removed for periodic cleaning of the noz-
zles, to prevent possible clogging. Wash them under running water and
carefully replace them in their proper position, checking that their rotary
movement is in no way impeded.
Grasp the middle of the spray arm, pull it upwards to remove it. Wash the
arms under a jet of running water and return them carefully to their posi-
tion. After reassembly, check that the spray arms turn freely.
HOW TO MAINTAIN YOUR DISHWASHER
• After Every Wash
Turn off the water supply to the appliance and leave the door slightly open
so that moisture and odours are not trapped inside.
• Remove the Plug
Before cleaning or performing maintenance, always remove the plug from
the socket.
• No Solvents or Abrasive Cleaning
To clean the exterior and rubber parts of the dishwasher, do not use sol-
vents or abrasive cleaning products. Only use a cloth with warm soapy
water. To remove spots or stains from the surface of the interior, use a
cloth dampened with water with a little vinegar, or a cleaning product
made specifically for dishwashers.
• When it is Not in Use
It is recommend that you run a wash cycle with the dishwasher empty and
then remove the plug from the socket, turn off the water supply and leave
the door of the appliance slightly open. This will help the door seals last
longer and prevent odours from forming within the appliance.
• Seals
One of the factors that cause odours to form in the dishwasher is food that
remains trapped in the seals. Periodic cleaning with a damp sponge will
prevent this from occurring.
Error Codes:
Speed Cycle Light is Flashing: The water faucet may not be turned on,
the water intake is obstructed or the water pressure is too low.
Glass Cycle Light is Flashing: An area of the unit may be leaking. Turn
off the water supply and call for service.
19
Publicité
Table des Matières
