Functional Description - SELFSAT SNIPE PLATINUM Manuel Utilisateur

Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

3-2. Functional description

1. PI box
A. HOME Button / HOME LED (Blue)
i.
When the Home button is pressed, the antenna moves to the home position
ii.
HOME LED turn on when the antenna is in the home position, and Blink when the antenna is
move to home from another position
B. POWER Button / POWER LED (Red)
i. POWER ON / LED ON
a.
Press the POWER button to turn on the PI box, and power to the antenna unit
ii. POWER OFF / LED OFF
a.
n order to turn off the PI power, you must first turn off the STB power
b.
When the power of the STB is turned off, Press and hold for more than 3 seconds to turn off the
power. (Power LED OFF)
- At this time, if the antenna is not in the home position (e.g. when towards the satellite), the
power is turned off after the antenna is moved to the home position
c.
If the STB is not powered off, the PI BOX does not turn off even when the power button is
pressed, and the POWER LED flashes to indicate that the STB Power is ON.
- At this time, the PI does not turn off, and only the antenna moves to the home position
C. Basic Features
i. Power save mode
a.
When receiving a broadcast signal or when the antenna is in the home position, the antenna
operates only with the current from the STB
b.
When searching for a satellite or when the antenna moves, it automatically changes to the power
connected to DC power adapter
ENGLISH - 7
HOME LED
POWER LED
HOME button
POWER button
Power
Fixed hole
to STB
to unit

Publicité

Table des Matières
loading

Table des Matières