SELFSAT SNIPE PLATINUM Manuel Utilisateur page 11

W - E9 : FC
ASTRA 1
Home
E. DiSEqC setting
W - E9 : FC D
ASTRA 1
Found SAT
When the user sets up the STB to use DiSEqC 1.1, the list of DiSEqC satellites in the STB must be set in the
same order as the list of satellites in SNIPE
Refer SNIPE's pre-satellites for DiSEqC 1.1 below.
NO
1
2
3
4
5
6
7
8
9
10
11
12
The MAC Address of the connected antenna, the satellite name set for the antenna,
and the current status are displayed.
Press the left or right arrow button to select the desired satellite and press the SET
button to search for the satellite
HOME - When the antenna is in the home position
Searching - When the antenna is searching for satellites
Found SAT - When the satellite search is complete
Mov To Home - the antenna will move to the home position.
Pressing the DiSEqC button changes the DiSEqC settings of antenna unit.
DiSEqC mode is indicated by [D] mark in the first line
The DiSEqC function is disabled when the antenna is in the HOME position.
To use DiSEqC, press the DiSEqC button to activate the function when the message
'Searching' or 'Found SAT' to appear on the remote control screen
LNB
LNB 1
LNB 2
LNB 3
LNB 4
LNB 5
LNB 6
LNB 7
LNB 8
LNB 9
LNB 10
LNB 11
LNB 12
ENGLISH - 10
Satellite
Turksat
ASTRA2
ASTRA3
ASTRA1
Hot Bird
Eutelsat 9
ASTRA 4
Thor
Eutelsat 5W
Hispasat
USER1
USER2