SELFSAT SNIPE PLATINUM Manuel Utilisateur page 10

Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

C. Power Button
i. POWER ON
a.
When press the POWER button on the remote control, the PI turns on and the antenna is powered
on
W - E9 : FC
Press POWER
W - E9 : FC
PI POWER ON
ii. POWER OFF
a.
Press the power button of Remote control and hold for more than 3 seconds to turn off the PI
power after the antenna is moved to the home position
b.
In order to turn off the PI power, you must first turn off the STB power.
Can be checked the states of STB power on the remote control screen
W - E9 : FC
Press POWER
W - E9 : FC
Now STB On
Home
c.
When the power of the STB is turned off, press the power button of Remote control, the power of
PI is turned off after the antenna is moved to the home position (if the antenna is not in the home
position)
d.
If the STB's power is not turned off, the PI BOX will not turn off even if you press the power button
on the remote control, and the remote control screen indicates that the STB power is ON. At this
time, the PI does not turn off, and only the antenna moves to the home position
D. Basic Features
CONNECTING
Remote control
Version : XX
W - E9 : FC
Connected
Indicated when PI is off. When you press the power button, the screen changes as
shown below
Indicated when PI is turn on (appears for about 2 seconds)
Indicated when PI power (antenna power) is turn off
Indicated that the PI cannot be turned off because the STB power is on (appears
for about 1 second)
The remote control automatically searches for nearby antenna unit.
If there is an antenna that has been connected before, connect it immediately
When the remote control and the antenna are connected, a "Connected" message
appears.
ENGLISH - 9

Publicité

Table des Matières
loading

Table des Matières