V-2-6- Navigation Lights; V-2-7- Wiring An Accessory - Zodiac OPEN 3.1 Manuel Du Propriétaire

V-2-6- Navigation lights

Use this button to switch on the navigation lights.
It has 3 positions.
 Off position
 White light position
 White light, red light and green light
position.

V-2-7- Wiring an accessory

1º/ Choose a free fuse location.
2º/ Connect the power supply of your accessory to the terminal corresponding to this slot using a
6mm female tab type terminal.
3º/ If you have to add cable for the connection, use cable with a cross-section of at least 1.5mm² that
complies with "marine" standards (UL1426 or SAE J378 or SAE J1127 or SAE J1128 or more generally
meeting ABYC and/or EC standards).
4º/ Connect the earth cable of your accessory to the ground terminal strip using a Ø5 "ring terminal"
(same comment as for the cable above).
5º/ Insert an ATO type fuse with a max current of 15A and greater than the load current of your
device.
+
18
Red wire
6
-
613770 A
Red wire
Page 49 / 65
1 2
Red wire
Red wire
Direct wiring
Wiring with
switch
E
N
G
L
I
S
H
3
Edition 2