Endress+Hauser iTEMP HART TMT112 Bref Mode D'emploi page 11

<
Temperature transmitter iTEMP
Table of contents
1 Safety notes .................................................................................................................................. 11
2 Function ....................................................................................................................................... 12
3 Dimensions................................................................................................................................... 12
4 Installation.................................................................................................................................... 13
5 Wiring overview ........................................................................................................................... 14
6 Operation ..................................................................................................................................... 16
7 Accessories ................................................................................................................................... 18
8 Supplementary documentation ...................................................................................................... 18
1 Safety notes
® ®
HART DIN rail TMT112
Correct use
The unit is a universal, presettable temperature transmitter for resistance
thermometer (RTD), thermocouple (TC) as well as resistance and voltage
sensors. The unit is constructed for mounting on a DIN rail according to
IEC 60715.
The manufacturer cannot be held responsible for damage caused by
misuse of the unit.
Separate Ex documentation is contained in this operating manual for mea-
surement systems in hazardous areas. The installation conditions and con-
nection values indicated in these instructions must be followed!
Installation and wiring of the unit must only be carried out by trained skil-
led personnel and only in conjunction with these operating instructions.
en
11