Front Panel Explanations - Atlantis HostPower 1102 Mode D'emploi

Try the field working condition by running some application programs on your

computer and repeating step.
Check if the UPS is initiated properly to support continuous operation.


1.8 Front Panel Explanations

On the front panel You can found a LCD Display for an easy diagnostic
LED
Main Switch
1
2
3
Plug the UPS into the wall outlet to charge the UPS for over
6 hours before using the UPS.
Information
To Control on/off the UPS when Utility is normal.
To enable "DC-Start" Function when Utility fails. (To enable DC
Start properly, you are recommended to connect <80% output
load with the UPS only). P.S. Make sure the computer connected
to the UPS is switched on before enable the "DC-Start" function.
You are not recommended to add some other computer or
peripherals after DC-Start function is activated.
Input voltage.
Output voltage.
AC mode indicator.
29