Operating The Appliance - SilverCrest SSME 250 A2 Mode D'emploi

Operating the appliance

1) Place the base
surface.
2) Select the appropriate blender jug
your smoothie:
–
large blender jug
smoothie,
–
small blender jug
smoothie.
3) Add the prepared ingredients to the blender
jug / . Always add liquid ingredients first
and then the more solid ingredients such as the
fruit and/or crushed ice.
CAUTION! MATERIAL DAMAGE!
► Never fill the blender jug
dients past the MAX marking! The appliance
will not be able to process the ingredients!
► Always add at least 100 ml of liquid into the
blender jug /
4) Place the blade holder
jug / so that the blade
the blender jug
holder firmly in place.
5) Now place the blade holder
tached blender jug
so that the arrow on the blade holder
pointing to the
CAUTION! MATERIAL DAMAGE!
► To turn the blade holder
the blade holder
blender jug / ! Otherwise, the blender
jug / will detach and the ingredients will
spill out!
6) Then turn the blade holder
on the blade holder
on the base . The blade holder
audibly click into place so that it sits firmly on
the base .
7) Insert the plug into a mains power socket.
■ 6 │ GB │ IE │ NI
on a clean and level
/
, for a roughly 600 ml
, for a roughly 300 ml
/ with ingre-
when making a smoothie.
on the blender
extends into
/ , and screw the blade
and the at-
/ onto the base
symbol on the base
, always hold only
and never try to turn the
so that the arrow
points to the symbol
must
8) Set the speed switch
and wait until the smoothie has reached the
desired consistency.
9) Set the speed switch
for
NOTE
► If the ingredients do not mix properly, it may
be necessary to lift up the appliance and
shake it a little. When doing so, take hold of
the blade holder
jug /
not come apart.
CAUTION! MATERIAL DAMAGE!
► Do not operate the appliance for longer than
1 minute in one session. The appliance will
overheat! After using for 1 minute, allow the
appliance to cool down completely.
CAUTION! MATERIAL DAMAGE!
► To turn the blade holder
the blade holder
blender jug
jug /
spill out!
10) When the smoothie is ready, turn the blade
holder
is
points to the
.
remove the blade holder
blender jug
11) Turn the blender jug
the blade holder
12) Screw the lid
You can drink the smoothie through the drink-
ing opening on the lid
to the required speed
to "0".
together with the blender
and the base so that they do
, always hold only
and never try to turn the
/ ! Otherwise, the blender
will detach and the ingredients will
until the arrow on the blade holder
symbol on the base
with the attached
/ .
/ over and unscrew
.
/ onto the blender jug
/ .
SSME 250 A2
and
/ .