Safety Instructions - SilverCrest SSME 250 A2 Mode D'emploi

Safety instructions

DANGER – ELECTRIC SHOCK!
The appliance must only be connected to a correctly installed and
►
earthed mains power socket. Ensure that the rating for your local
power supply corresponds with the details on the rating plate of the
appliance.
Ensure that the power cable does not become wet or moist during use.
►
Route the cable in such a way that it cannot be crushed or damaged.
Keep the power cable away from hot surfaces.
►
Do not perform any repairs on the appliance. All repairs must be
►
performed by our Customer Service Unit or by a qualified specialist
technician.
Remove the plug from the mains power socket when the appliance is
►
being cleaned or in the event of a fault. Just switching off the appliance
is not sufficient, as the appliance is subject to mains voltage for as
long as the plug is connected to the mains power socket.
Arrange for defective power plugs and/or cables to be replaced as
►
soon as possible by a qualified technician or by our Customer Service
Department to avoid the risk of injury.
The appliance and its connecting cable must be kept away from
►
children.
Never submerge the appliance in water or other liquids.
SSME 250 A2
GB │ IE │ NI │ 3 ■