Worx WG801E Notice Originale page 13

Starting and stopping with the
telescopic handle
Warning: Do not use the shrub
shear blades (12cm/20cm) when
working with the telescopic handle.
MAINTENANCE
NOTE: To ensure long and reliable service, carry out
the following maintenance regularly.
Remove the battery before carrying out any
adjustment, servicing or maintenance.
Check for obvious defects such as loose, dislodged or
damaged blade, loose fixings and worn or damaged
components.
Check that covers and guards are undamaged and
correctly fitted. Carry out necessary maintenance or
repairs before using.
BLADE MAINTENANCE
Always clean the cutting blades after operation and
periodically lubricating the cutting blade.
Visually check the condition of the cutting edges of
the cutting blade.
Ensure that the blade is covered with the blade guard
supplied when not in use.
CLEANING/STORAGE
Clean the exterior of the machine thoroughly using
a soft brush and cloth. Do not use water, solvents
or polishes. Remove all debris, especially from the
ventilation slots.
Store the machine in a secure dry place out of reach
of children. Do not place other objects on top of the
machine.
ENVIRONMENTAL
PROTECTION
Waste electrical products must not be disposed
of with household waste. Please recycle where
facilities exist. Check with your local authorities
or retailer for recycling advice.
Cordless shrub shear/
grass shear
DECLARATION OF
CONFORMITY
See Fig. J
We,
POSITEC Germany GmbH
Grüner Weg 10, 50825 Cologne, Germany
Declare that the product,
Description WORX cordless shrub shear and
grass shear
Type WG801E WG801E.1 WG801E.2 WG801E.3
WG801E.4 WG801E.9 (800-809-designation
of machinery, representative of grass shear/
shrub)
Function Cutting grass, trimming hedges and
brushes
Complies with the following Directives,
2006/42/EC
2014/30/EU
2011/65/EU
2000/14/EC amended by 2005/88/EC
2000/14/EC amended by 2005/88/EC:
- Conformity Assessment Procedure as per Annex V
- Measured Sound Power Level 79.4dB (A)
- Declared Guaranteed Sound Power Level 82dB (A)
Standards conform to,
EN 60335-1
EN 50636-2-94
EN 62233
EN ISO 3744
EN 55014-1
EN 55014-2
EN 60745-1
EN 60745-2-15
The person authorized to compile the technical file,
Name Marcel Filz
Address Positec Germany GmbH
Grüner Weg 10, 50825 Cologne, Germany
2019/01/09
Allen Ding
Deputy Chief Engineer, Testing & Certification
Positec Technology (China) Co., Ltd.
18, Dongwang Road, Suzhou Industrial
Park, Jiangsu 215123, P . R. China
13
EN