Télécharger Imprimer la page

Toro 51466 Manuel De L'utilisateur page 2

Publicité

Les langues disponibles
  • FR

Les langues disponibles

  • FRANÇAIS, page 9
Safety
WARNING!—When using the machine, the safety
rules must be followed. For your own safety and
bystanders, please read these instructions before
operating the machine. Please keep the
instructions safe for later use.
It is essential that you or any other operator of
the appliance read and understand the contents of
this manual before operating the appliance. Pay
particular attention to the safety alert symbol
which means CAUTION, WARNING or
DANGER—personal safety instruction. Read and
understand the instruction because it has to do with
safety. Failure to comply with these instructions
may result in personal injury, risk of fire, or
electrical shock.
The following safety information has been adapted
from European Standard EN 786:1996:
Wear protective glasses or goggles.
Never allow children or people unfamiliar with the
instructions to use the machine.
Stop using the machine while people, especially
children, or pets are nearby.
Only use the machine in daylight or good artificial
light.
Before using the machine and after any impact,
check for signs of wear or damage and repair as
necessary.
Never operate the machine with damaged guards
or without the guards in place.
Keep hands and feet away from the cutting
means at all times and especially when switching
on the motor.
Take care against injury from the line cutting
blade on the underside of the trimmer. After
installing new line, always return the machine to
its normal operating position before switching it
on.
Never use metal cutting elements
Never use replacement parts of accessories not
provided or recommended by the Toro Company.
Always ensure that the ventilation openings are
kept clear of debris.
2001—The Toro Company
8111 Lyndale Ave., Blomington, MN 55420, USA
2
The machine weighs 4.1 kg.
After use, check the machine for damage.
When not in use, store the machine away from
children.
If the trimmer requires repair, take it to an
Authorized Toro Dealer.
Use only Toro replacement parts and
accessories.
Sound Pressure
This unit has a maximum sound pressure level at the
operator's ear of 83.5 dBA, based on measurements
of identical machines per Directive 98/37/EC.
Sound Power
This unit has a guaranteed sound power level of
96 dBA, based on measurements of identical
machines per Directive 2000/14/EC.
Vibration, Hand/arm
This unit does not exceed a hand/arm vibration level
2
of 1.69 m/s
, based on measurements of identical
machines per Directive 98/37/EC.
Safety/Instruction Decals
Important: Safety and instruction decals are located
near areas of potential danger. Replace damaged or
lost decals.
1. Shorten the line to 20 cm
dia. to cut inside the wire
guide.
3327–488
106-1932
2. Lengthen the line to 25 cm
dia. to cut outside of the
wire guide
Printed in China
All Rights Reserved

Publicité

loading