Getting Started; Listening To Radio - auna TT-92W Mode D'emploi

GETTING STARTED

Installation
• Unpack all parts and remove protective material.
• Do not connect the unit to the mains before checking the mains voltage
and before all other connections have been made.
• Do not cover any vents and make sure that there is a space of several
centimeters around the unit for ventilation.
Connection
• Connect the Power Cord (26) to AC outlet.
• Turn the Power On/Off Knob (16) clockwise until Power LED Indicator
(17) light up. It's mean the power supply is normal. Now your system is
ready to play music.

LISTENING TO RADIO

1 Turn on the Power (16) and select Function knob (5) to "Tuner" position.
2 Select the desired band by Radio Band Selector(2)
3 Tune to the required station by turning the Tuning Knob (18).
4 Adjust the Volume Knob (16) to desired volume level.
FM & FM-stereo reception
• Set the Radio Band Selector (2) at "FM" position, program are
received in Mono mode. In particular when stereo signal are weak. It is
preferable to receive the program in Mono.
• Set the Radio Band Selector (2) at FM-ST" position for receiving stereo
programs. The FM-Stereo LED Indicator (6) will light up to show FM
Stereo program is receiving.
Hints for best reception: The receiver has a built-in FM Wire Antenna
(25) hanging at the rear cabinet. This wire should be totally unraveled
and extended for best reception.
EN
23