Product Description; Installation Examples; Approvals And Markings; Design And Function - DOLD SAFEMASTER STS V Mode D'emploi

Safety Technique
SAFEMASTER STS
Safety switch- and key interlock system
Padlock modules V and W
Presentation: key extracted

Product Description

The padlock module V is assembled together with other modules into an
STS unit and can be locked with a padlock. It is hung up on the non-
removable key. The key is used thereby for unlocking or locking of
functions. The module can be installed in 4 positions, each rotated by 9°.
ATTENTION!
Mechanical function modules can be installed above and/
!
or below the padlock module!
Electrical modules can only be installed below the
padlock module!

Installation Examples

ZRHV01A SXV02M
All technical data in this list relate to the state at the moment of edition. We reserve the right for
technical improvements and changes at any time.
STS-System Benefits
• EU-Test certificate according to the directive 2006/42/EG, annex IX
• For safety applications up to PLe/Category 4 acc. to DIN EN/ISO 13849-1
• Modular and expandable system
• Rugged stainless steel design
• Wireless mechanical safeguarding
• Combines the benefits of safety switch, locking module
and key trans fer in a single system
• Easy installation through comprehensive accessories
• Protection against lock-in
• Coding level low, medium, high according to DIN EN ISO 14119:2014-03
Features
• Permits personal influence on a safety concept
• For up to 3 padlocks with shackle diameters from min. 6 mm to max. 8 mm
• Module expansions possible below and above the module
• Allows blocking of entries and control elements
• Choice of direction in 4 increments of 90°

Approvals and Markings

Design and Function

An extremely robust and flexible padlock reliably monitoring locking by
mechanical means, e.g. of protective hood or door, switch or door lock,
thus enabling personal protection measures.
To fulfil its function, the module must be used in connection with other
function modules such as switch, solenoid lock, actuator or key modules.
These modules are always installed at a strategic location in the system
to ensure forced operation.
The padlock module therefore offers the operating personnel the
possibility of taking control of their own safety.
Example M10VA
A key must first be inserted here in the key module and the key on
the padlock module must be subsequently pulled. Only then can it be
secured with a padlock before a door or hood can be opened. The
removal of the key on the padlock locks the key module 10 and unlocks
the actuator module A. Hooking in the padlock in this case serves as a
personal security measure against being locked in.
RXWA
7
C US
SAFEMASTER STS Padlock modules V and W / 09.07.20 en / 270A