Replacing Led Lights - Newage 66901 Mode D'emploi

Replacing LED Lights

• Disconnect grill at power source before replacing light bulbs.
• The oil from your fingertips will reduce the life of the bulb. It is recommended to touch the bulb
as little as possible and to wipe the bulb with a cloth after handling with bare fingers.
Remove the screws holding the LED light
1
holder using Phillips head screw driver.
Loosen the lock nut and replace the LED
3
Bulb.
52
NOTE
Remove the LED light assembly and
2
disconnect it from the power connector.
Connect the LED light assembly to the
power connector and secure it to the grill
4
with the two screws using Phillips head
screw driver.