Newage 66901 Mode D'emploi page 50

Grill Maintenance and Cleaning
SPECIAL NOTE FOR LOCATIONS NEAR POOLS AND COASTAL AREAS:
The 304 stainless steel material used in the construction of a NewAge Grill is highly rust resistant,
however, chlorine in the air from swimming pools or the salt from sea air may cause surface rust to
appear and even create some pitting if left on the product.
Here are a few tips to avoid this:
• Regularly wipe down the exterior surfaces with a damp cloth. Micro fiber cloths perform very
well.
• Allow the surfaces to dry before installing the cover. Do not cover a damp grill.
• In extreme environments apply a rust inhibitor which leaves a microscopic protective layer on
the grill. Products that provide a layer of vapor corrosion inhibitors (VpCI™) protect the surface
very well.
• For seasonal storage use the product referred to above, ensure the grill is dry and then cover and
secure the cover to minimize the amount of damp air getting to the surfaces.
THE NEWAGE WARRANTY DOES NOT COVER OCCASIONAL SURFACE RUST OR STAINING DUE TO
ENVIRONMENTAL CONDITIONS.
ACCESSING AND INSPECTING THE CONDITION OF THE SUPPLY HOSE
50
STEP 1 OPEN DOOR
STEP 2 INSPECT THE CONDITION OF THE HOSE
HOSE SHOULD HAVE A SMOOTH SNAKED PATH
TO PREVENT KINKS AND PREMATURE FAILURE.
PLEASE EXAMINE HOSE AND FITTINGS FOR
CRACKS, TEARS, OR WEAR MARKS FROM RUBBING
ETC.
Replacement supply hoses can be
ordered from ShopNewAge.com