Publicité
Les langues disponibles
Les langues disponibles
Maintenance Schedule
Daily - Before Use
•
Tighten knobs holding weights down
•
Check AC power cord. Do NOT operate equipment if AC power cord is cut, frayed or if ground is missing
•
Check to see if the quick release cam is still tight, the quick release bolt is housed in a slot on the handle support,
locating pins are in place and, locking handle is tight. Adjust all if needed
•
Check vacuum hose and connections (if equipped).
•
Check grip face and driver pad: inspect for wear/debris. Replace as needed. After use (daily).
Daily - After Use
•
Clean pad and base plate assembly : remove/replace pad as needed.
•
Inspect grip face for wear. Remove debris between grip face and base plate.
•
Wipe base plate and motor assembly with damp cloth to remove dust build up.
•
Make certain a pad is placed on grip face.
Weekly
•
Check grip face for wear.
•
Use vacuum to clean away debris build-up around motor assembly, weights and base plate.
Annually
•
All isolators must be replaced
•
Bearing Assembly Replacement*
* The bearings must be replaced every year under typical usage and are considered consumable parts. Heavier
usage places heavier demand on the bearings and will need to be replaced accordingly. A three month life
can be expected under heavy use.
N.B. Bearings and isolators should be replaced at the same time.
Manual Conventions
DANGER:
CAUTION:
Note: Provides helpful information.
Please read and observe all labels posted on the machine and in this manual. Serious injury or death may occur if safety instructions
are ignored.
Who to call for assistance
If you work with a Dustbane-authorized distributor, contact them for assistance. If any contents of the box are missing, contact your
Dustbane-authorized dealer, distributor or reseller. Make sure you have the machine's serial number, located on the back of the
machine, when you call.
Liability statement
This Dustbane product has been built to the highest industry standards. Please note and heed the WARNING and CAUTION labels
that have been placed on the equipment and in this manual for your safety. PLEASE DO NOT ATTEMPT TO OPERATE OR REPAIR THIS
EQUIPMENT WITHOUT ADEQUATE TRAINING. ANY USE, OPERATION OR REPAIR IN CONTRAVENTION OF THIS DOCUMENT IS AT YOUR
OWN RISK. BY ACCEPTANCE OF THIS SYSTEM YOU HEREBY ASSUME ALL LIABILITY CONSEQUENT TO YOUR USE OR MISUSE OF THIS
EQUIPMENT. DUSTBANE SHALL NOT BE LIABLE FOR ANY INCIDENTAL, INDIRECT, SPECIAL OR CONSEQUENTIAL DAMAGE OF ANY
KIND.
4
Equipment specifications, applications and options are subject to change at the sole discretion of Dustbane without notice.
Indicates an imminently hazardous situation which, if not avoided, may result in death or serious injury.
Indicates that machine or property damage could result if instructions are not followed.
Publicité
