Activating The System; Pairing Your Mobile Phone And The Hands-Free Kit For The First Time; Pairing With Other Additional Phones; Clearing The Memory - Alfa Romeo ALFA 156 Mode D'emploi

ACTIVATING THE SYSTEM

After first pairing, just turn the ignition key
to MAR to activate the system. Both lights
on the keypad are on when the system is
active. To pair your phone and the hands-
free kit after first pairing, get into the car
with your phone on and the Bluetooth
function active.
PAIRING YOUR MOBILE
PHONE AND THE HANDS-FREE
KIT FOR THE FIRST TIME
To pair your mobile phone with your hands-
free kit for the first time you shall activate the
Bluetooth ® function on your phone as de-
scribed on your phone user's guide. The cor-
responding icon is displayed on your phone
when the function is active.
When pairing for the first time, the message
"Accoppiare l'apparecchio" (Pair kit) will be
heard (the message will always be in Ital-
ian since it is the default language).
Phone/hands-free kit pairing procedure de-
scribed in the phone manual shall therefore
be carried out (follow the pairing instructions
given on your phone user's guide).
IMPORTANT When the use of the
hands-free kit with Bluetooth
nology is not desired, message "Accoppiare
l'apparecchio" (Pair kit) can be prevented
from being repeated by setting car radio
channel PHONE minimum volume (see
Sound System manual). Message "Accop-
22
ClubAlfa.it
piare l'apparecchio" (Pair kit) shall only be
heard if the sound system is on.
During the pairing procedure the
message asking for the passcode
will be displayed; enter "1234" as
passcode and then confirm it.
®
Once this done, connection between your
phone and your hands-free kit will take place
automatically as soon as the two devices are
less than a few meters apart. A "beep" will
be heard, indicating that connection is es-
tablished. Here follows an example of first
pairing procedure for the most common mo-
bile phones.
IMPORTANT The system operates on-
ly when the ignition key is turned to MAR.
Pairing procedure shall be performed only the
first time you pair your phone and your hands-
free kit. Should instruction "Accoppiare l'ap-
parecchio" (Pair kit) not be heard at first pair-
ing, reset the system by pressing simultane-
ously buttons (A) and (B) on the keypad for
2 seconds at least.
PAIRING WITH OTHER
ADDITIONAL PHONES
If you decide to pair another phone, you just
® wireless tech- have to follow the ordinary pairing procedure
described in the previous paragraph, in this way
you can connect up to 3 mobile phones. To pair
other phones you shall reset the system (as
described in next paragraph).
ClubAlfa.it

CLEARING THE MEMORY

Press the green (A) and red (B) buttons si-
multaneously for at least 2 seconds for clearing
the system memory.
IMPORTANT Clearing the memory will
disconnect all stored phones, will clear any
phone number stored in the system memory
and will require to repeat the pairing phase.

PAIRING PRIORITY

If 2 mobile phones at least are paired, the
first phone paired (in chronological order) will
have highest priority. This means that when
getting into the car with system active (key
at MAR), this will be the first phone to be
searched and, if present, to be connected.
Should the priority phone not be found, the
system will then search for the other phones.

COMMUNICATING

Find below a description of the main com-
munication procedures valid for almost all mo-
bile phones.
Making a call manually
– Dial the number on the mobile phone
keypad
– press directly the phone button to start
the call