Télécharger Imprimer la page

Sonia Maia Mode D'emploi page 6

Publicité

Les langues disponibles
  • FR

Les langues disponibles

5
Face probe
6
Eye probe
7
Spatula
8
Vacuum handpiece
9
Electrode tube
10
Connection of accessories
● Connect one end of the air hose with the "spray
tube" label to the spray tank inlet, and the other
end to the "SPRAY" tower spray connection.
● Connect one end of the air hose with the "vacuum
tube» label to the suction connection of the
"VACUUM" tower and the other end to the intake
of the suction hand-piece. Check the end of the
vacuum handpiece to see whether the sponge filter
is installed; otherwise, install it. Note the direction
of the arrow on the intermediate filter. It should be
pointing towards the handpiece.
● Fill the water tank by opening the steamer filling lid
and pouring distilled water. The water level must
stand between the "MIN" and "MAX" lines.
EN
6
FACIAL STEAMER FUNCTION
● Precautions
- The use of distilled water is recommended to
extend the useful life of the steamer components.
- Before operating the facial steamer, confirm
that the water tank has been correctly screwed
and tightened, and that the water level stands
between the "MIN" and "MAX" level marks.
- Check the safety distance between the
mouthpiece and the patient's face, as inadequate
distance may cause skin burns.
- Before adding essential oil, please ensure that the
steamer is in standby mode.
- Wait until the steam is produced steadily before
starting the treatment.
- The ozone function should be used according to
the professional's criteria depending on the type
of skin to be treated.
- Adjust the steamer arm according to the angles
that appear later in this manual. Do not force any
movement.
- To remove the water tank, wait until it cools down
and then unscrew the tank with your hands.
- Should there be a water leak, unplug the tower
from the mains. Check if the water tank is
properly screwed. If the problem persists, contact
your dealer.
● Control panel
1 2 3
4
5 6
7 8
1
Water-level warning indicator
2
Ozone function indicator
3
Ozone function on/off button
4
Decrease time button
5
Power on indicator
6
On / off button
7
Heating indicator
8
Heating/Steaming button
9
Steaming indicator
10
Increase time button
9
10
11
12
13

Publicité

loading

Ce manuel est également adapté pour:

H5050