Sonia Maia Mode D'emploi page 12

- The run / stop indicator will light red on the
push button
• Set the timer using the
choose the operating time of the machine, in a
range of between 1 and 30 minutes.
• Set the power using the
choose the power of the machine, in a range of
between 1 and 9.
• Use the
- When in operation, the Start/Stop indicator
will light up green.
- When paused or in standby mode, the Start/
Stop indicator will light up red.
- Operation
• The unit must be in standby mode with the
Start/Stop indicator lit up red.
• Select the direction of rotation, the operating
time and the power.
• Hold the brush handpiece in your hand and
press . The Start /Stop indicator lights up
and the brush begins to spin.
Bear in mind
• Before starting treatment, check that the brush
has been inserted correctly.
• If during operation of the device a change of
direction of rotation is selected, the device will
enter safety mode and after stopping rotation
will begin to rotate in the new direction.
• Slow down to the minimum speed before
touching the patient's skin.
• Gradually increase the speed until you reach
the desired level.
CLEANING AND MAINTENANCE
● Before cleaning the device, unplug it from the
mains.
● Clean the device with a soft, dry cloth. Do not use
liquids to clean it.
● After each use, the various components and
accessories must be sterilised and left to dry.
● For maintenance or repairs of any part of the
product, please contact your distributor or
specialised technician.
RECYCLING
If you need to dispose of the product or any of its
parts or accessories, please check and respect the
laws and regulations applicable to waste management
and environmental protection.
EN
12
or buttons to
or buttons to
button to start or stop the device.