Sentiotec VitaMy 164 Serie Instructions De Montage Et Mode D'emploi page 76

Instructions for installation and use
Installation of the read radiator
Fig. 41: Install the rear radiator (infrared radiator ECO 350)
Put the two radiators into the cutout from inside. Screw the radiators into place
with 4 screws each.
CAUTION!
Ensure that the junction box of the radiator on the top!
Fig. 42: Installing the read radiator blind
Screw in the wood blinds of the radiators in front of the rear of the cabin with
4 screws each (available holes).
p. 32/44
Screws
8 units: 3 x 18
Screws
8 units: 3.5 x 50