Sentiotec VitaMy 164 Serie Instructions De Montage Et Mode D'emploi page 67

Instructions for installation and use
Fig. 24: Door magnet installation
The magnet for the door has to be on the side to which the door opens.
Mount the magnet on the appropriate side, if appropriate.
Cut the door insulation over the recess for the magnet with a sharp knife and
expose the recess. Using a small wooden block, hit the door magnetic with the
hammer in the recess. Adjust the length of the insulation to the magnet.
Fig. 25: Installation of the transfer plate
Slide the transfer plate at the spot on the glass door on which the magnet is
located on the skirting.
p. 23/44
EN