Sentiotec VitaMy 164 Serie Instructions De Montage Et Mode D'emploi page 60

Instructions for installation and use
Glass element installation
Insert the U-profile flush to the glass plate. When doing so, pay attention to the
flush meeting of the profiles with the glass on the side where the door will be.
WARNING!
After the cabin has been positioned correctly, glue the U-profiles with
silicone or installation glue to the floor.
When installation the two glass plates, you can decide whether the door
should be hinged on the right or left. On the glass, pay attention to the
holes for the fittings of the door.
Fig. 11: Attach the U-profiles to the glass plates
p. 16/44