Optional Parts - KITO ER2 Serie Manuel Du Propriétaire

Appendix

Optional Parts

■ Friction Clutch with Mechanical Brake
KITO's original friction clutch equipped with mechanical brake
■ Load Bell: Over load alarm
An alarm unit to detect over load
Detection load: 100 to 110 % of the capacity
Alarm sound level: 85 dB or more
■ NR Relay: Negative Phase Connection Preventive Device
A device to detect the negative phase connection and open phase connection immediately and shut down the power
automatically.
■ Bumper: Stopper for Trolley MR2
A shock absorber for collision (special for MR2)
Be sure to use the bumper when the trolley uses urethane wheel.
A
■ T-shape Suspender: Attachment for power feeding
Code
T-shape Suspender
100
T-shape Suspender 175
• Contact KITO when the Travel Rail width exceeds 175 mm.
Mounting Suspender Presser
●
• When using T-shape Suspender, the suspender presser needs to be mounted to the trolley.
• Following holes to mount the suspender presser are worked on the main frame of the trolley. Mount the suspender
presser with socket head bolts.
• Fix the cable support to the suspender presser with Chain Pin and split pin and mount the power cable.
< Manual Trolley 125 kg to 3 t >
Socket head bolt
Spring washer
Split pin
120
Travel Rail width (mm)
75
100
125
150
175
< Manual Trolley 5 t >
Socket head bolt
Spring washer
Suspender
presser
Counter sunk
screw
Cable support
Split pin
Chain hanger pin
Hole pitch
A : (53mm)
B : (78mm)
C : (103mm)
D : (128mm)
A : (153mm)
Suspender
presser
Cable
support
Chain hanger pin
A
B
C
D
< MR2 >
Suspender
presser
Chain hanger
pin
Power cable
Split pin
Socket head bolt (back side)