Safety Warnings For Ride-On Lawn Mower With Seated Operator; Training; Preliminary Operations; During Operation - Stiga MPST 84 Li 48 V1 Manuel D'utilisation

exhibit unpredictable behaviour resulting
in fire, explosion or risk of injury.
f) Do not expose the battery pack
or the tool to fire or excessively
high temperatures. Exposure
to fire or temperatures exceeding
70°C may cause an explosion.
g) Follow all the charging instructions
and do not charge the battery pack
or tool outside the temperature range
specified in the instructions. Improper
charging or at temperatures outside
the specified range can damage the
batteries and increase the risk of fire.
h) Do not charge the battery pack in
places with vapours or flammable
substances present or in rooms
which are damp. If it is not possible
to avoid damp environments, use a
power socket protected by a differential
switch (RCD-Residual Current Device)
to reduce the risk of electric shocks.
i) Keep the battery charge cable
out of the reach of children.
6) Technical Assistance
a) Have your power tool serviced by
a qualified repair person using
only identical replacement parts.
This will ensure that the safety of
the power tool is maintained.
b) Do not carry out repairs on the
battery. Repairs must be carried
out by the manufacturer or by a
specialized service centre.
3. SAFETY WARNINGS FOR
RIDE-ON LAWN MOWER
WITH SEATED OPERATOR

3.1 TRAINING

• Become acquainted with the controls
and the proper use of the machine. Learn
how to stop the machine quickly.
• Never allow the machine to be used by
children or individuals who are not familiar
with the instructions. Local laws may
establish a minimum age for users.
• Do not allow children or other
passengers to ride on the machine.
• Bear in mind that the user is responsible
for accidents or unexpected events
occurring to other people or their property.
It is the user's responsibility to assess the
potential risk of the area where work is to
be carried out and to take all the necessary
precautions to ensure his own safety and
that of others, particularly on slopes or
rough, slippery and unstable ground.
• This manual is an integral part of the machine
and therefore must always be accompany it in
the case of temporary or definitive transfer.

3.2 PRELIMINARY OPERATIONS

Personal Protective Equipment (PPE)
• Wear suitable clothing, strong work shoes
with anti-slip soles, and long pants. Do not
operate the machine barefoot or wearing open
sandals. Wear hearing protection devices.
• Use of hearing protections can reduce
the ability to hear any warnings (shouting
or alarms). Be careful of what occurs
around you in the work area.
• Never wear scarves, shirts, necklaces,
bracelets, loose flowing clothing, laces or
ties or any hanging or flapping accessory
that could catch in the machine or in any
objects or materials in the work area.
• Tie up long hair.
Work / Machine Area
Thoroughly inspect the entire work area and
remove anything that could be thrown by the
machine or damage the cutting means/rotating
units (stones, branches, iron wire, bones, etc.).

3.3 DURING OPERATION

Work Area
• Do not use the machine in environments
that pose the risk of explosion, in the
presence of flammable liquids, gases
or powders. Electrical contact or
mechanical rubbing can generate sparks
that can ignite powder or vapour.
• Work only in daylight or with good artificial
light in good visibility conditions.
• Keep people, children and animals
away from the work area. Children must
be supervised by another adult.
• Avoid working with wet grass, in the rain
and when there is a risk of a thunderstorm,
and especially of lightning.
EN - 5