Connecting Active Current Source - Endress+Hauser RIA261 Mode D'emploi

5 Electrical connection
#
36
ƒig. 4: Electrical connection
In order to do this follow these instructions:
•
Loosen and remove the unit lid.
•
Hold the top of the electronics and pull forwards and down, (see
sketch).

5.1.3 Connecting active current source

E.g. a sensor with its own power supply and active current output:
Note: If a respective barrier is used the unit can be installed directly in
the hazardous area.
ƒig. 5: Connecting active current source
Digital field display