Programming The Robot - ECOVACS ROBOTICS DEEBOT M8 Mode D'emploi

3.4 Programming the Robot

DM85 has a Time Scheduling function. DM85 can be programmed to automatically clean once
or twice per day, at specific times, even if nobody is at home. The current time of day and the
cleaning times are scheduled using the Remote Control.
* All scheduled cleanings are performed in AUTO Cleaning Mode.
* Before programming the robot, press any button on the Remote Control to wake up the Remote Control
LED Screen. The Remote Control uses a 12-hour clock with "AM" and "PM" indicators.
Set the Current Time of Day
Press button on the Remote Control until
flashes and illuminates on the Remote
Control LED Screen.
Press button on the Remote Control to confirm
and save the current time of day.
All manuals and user guides at all-guides.com
3. Operating and Programming
Press the up and down Direction Control
Buttons to adjust "hour" and "minute"
number. Press the left and right Direction
Control Buttons to switch between hour,
minute and AM/PM.
13
EN