3
1
* if fitted
*** optional extra
GB
Seat functions and operation
Absorber
The absorber setting of the seat can be varied
to suit the on and off-road driving conditions.
The cushioning effect can be individually
adjusted for this purpose.
Turn the lever to the desired position and
release
1
soft
2
medium
3
hard
Position 2 is the basic setting recommended
by the manufacturer for an average driver's
weight.
Furthermore, shock absorption can be
adjusted in two additional setting positions
between the respective degrees of
absorption.
Fore/aft adjustment without
control carrier equipment
The fore/aft adjustment is released by lifting
the locking lever.
WARNING! Risk of accident!
Do not operate the locking lever
while driving.
The locking lever must latch into the
desired position. It should not be possible to
move the driver seat into another position
when it is locked.
Control carrier * ***
To improve getting in and out of the seat the
left box can be tilt up.
25