Playback From Usb / Memory Card; Record Playback - auna TC-386 Mode D'emploi

EN
34

PLAYBACK FROM USB / MEMORY CARD

The system is capable of playing MP3 files stored on USB memory devices
or memory cards.
• Set the function selection button (6) to „USB/SD" and select „USB" or
„Card" with the source button (4).
• Connect a USB memory or insert a memory card.
• Inserting a USB media or memory card the wrong way round may
damage the device and/or memory.
• The unit automatically reads the media after it is inserted and displays
the number of available tracks.
• Playback is operated in the same way as for CD/MP3 CD.
Note: The unit can detect and read MP3 files only through the USB port.
If you connect an MP3 player, it may not be recognized due to different
file formats. This is not a malfunction. The USB port does not support
USB extension cables and cannot be connected directly to a PC.

RECORD PLAYBACK

• Remove the needle guard and detach the tonearm from the holder
before use and reattach it to the holder after use.
• Set the function selection button (6) to „Phono" and the „BT/Phono"
switch to „PHONO".
• Adjust the speed on the turntable speed control knob.
• Place the record on the turntable (use the spindle adapter if necessary).
• Lift the tonearm and move it slowly to the edge of the record. The
turntable will begin to spin.
• Place the tonearm in the desired position on the record.
• Adjust the volume.