EN
30
COMMISSIONING
Installation
•
Unpack the device and all parts and remove the protective packaging/
foil
•
Connect the unit to the power source first when all other necessary
connections have been made.
•
Do not cover the air vents. Make sure that there is a few inches of air
around the unit.
Attaching the cover
•
Push the metal clips to the back.
•
Connect the cover to the metal clips.
•
Connect the hinge of the cover to the main unit.
Power connection
•
Connect the power cord to a wall outlet and connect the speakers to
the speaker terminal.
•
Turn the control knob (19) until it clicks.
•
Set the function selector switch (6) to „Tuner" and the display (2)
switches on. The unit is now ready for operation and can play music.