Omron SpotArm i-Q142 Mode D'emploi page 21

HEM-1040-E.book 21 ページ ２０１１年１２月２０日 火曜日 午後１時４３分
The user alternates with each
press of the User ID selection
button , as shown below.
User A
Notes:
• If "G" is selected, the measurement results are not stored in
the memory.
• If the START/STOP button is pressed without selecting a user
ID, "G" is displayed and the measurement results are not
stored in the memory.
4.
Check that you are sitting correctly.
If you are not sitting correctly, the Posture symbol
on the display. The Posture symbol
are in the correct posture.
Start measurement only after checking that you are sitting
correctly.
Note: Depending on the angle of the arm cuff, the Posture
symbol
not in the arm cuff.
Angle of arm cuff
when sitting correctly.
User B Guest
will appear on the display even if your arm is
3. Using the Unit
appears
disappears when you
Not lit
21
EN