Omron SpotArm i-Q142 Mode D'emploi page 22

HEM-1040-E.book 22 ページ ２０１１年１２月２０日 火曜日 午後１時４３分
3. Using the Unit
5.
Press the START/STOP
button once to start
measurement.
Do not move your arm and
remain still until the entire
measurement process is
completed.
Display
During
Measure-
ment
Measurement ends
Note: The unit may automatically increase inflation if the arm
cuff inflation is insufficient. Automatic re-inflation occurs
only once.
22
Flashes in a
rotating fashion
Inflation
starts after
the arm cuff
has adjusted
to the size of
your arm
The arm cuff
adjusts to the
size of your arm
Measurement
displayed as the
arm cuff deflates
Ready for
measurement
Inflates to the
required pressure