Omron SpotArm i-Q142 Mode D'emploi page 19

HEM-1040-E.book 19 ページ ２０１１年１２月２０日 火曜日 午後１時４３分
2.
Place your left arm through
the arm cuff.
Notes:
• Do not remove the cuff lining
in the arm cuff.
• If the cuff lining becomes
detached, contact your
OMRON distributor or
Customer Services as
mentioned on the package.
3.
Place your elbow on the
elbow rest.
Taking measurements on the right arm
Refer to steps 2 and 3 above, and place your right
arm through the arm cuff as shown.
4.
Check that you are sitting correctly.
(Refer to Chapter 3.1.)
3. Using the Unit
Rest your elbow here.
Right arm
EN
19