Delay Start Cooking; Stand Time - Panasonic NN-GD569M Mode D'emploi

By using Delay/Stand Pad, you are able to program Delay Start cooking.
e.g.
Press
Delay/Stand
Pad.
NOTE:
1. Three stage cooking can be programmed including Delay Start cooking.
e.g.
Delay Start: 1 hour
2. If the programmed delay time exceeds one hour, the time will count down in units of minutes. If less than one hour, the time will count down in
units of seconds.
3. Delay Start cannot be programmed before any Auto Programs.
By using Delay/Stand Pad, you can program Stand Time after cooking is completed or use to program the oven as a minute timer.
e.g.
Set the desired cooking program and
cooking time.
NOTE:
1. Three stage cooking can be programmed including Stand Time.
e.g.
High Power: 4 min.
Once
2. If the oven door is opened during the Stand Time or Minute Timer, the time in the display window will continue to count down.
3. This feature may also be used as a timer. In this case press Delay/Stand Pad, set time and press Start Pad.
En-14

Delay Start Cooking

Set the delay time by turning the
Time/Weight Dial (up to 9 hours).
High Power: 10 min.
Once

Stand Time

Press
Delay/Stand
Pad.
Stand Time: 5 min.
Set the desired cooking program and
cooking time.
Simmer Power: 20 min.
5 times
Set desired amount of time by
turning the Time/Weight Dial (up to
9 hours.
High Power: 2 min.
Once
Press Start Pad.
Press Start Pad.