Downloading A Software Update, Managing Report Data - Gossen MetraWatt GEOHM C Mode D'emploi

Ð
Display: Press the Test key after each test pattern has been displayed
in order test the display elements.
Ð
Keytest: Perform the key test by pressing each of the softkeys once,
and by pressing the start key once in each of its three positions. The
keys appear filled in at the key pictograph after they have been tested.
Individual tests can be skipped by pressing the skip key before starting the
respective test. These tests are then identified with a horizontal dash, as is
also the case for tests which have not been passed.
4.6

Downloading a Software Update, Managing Report Data

If you require an updated test instrument software, it can be downloaded
with the help of WinProfi PC software. The data file with the desired soft-
ware version is transmitted to the test instrument via the serial interface.
The previously installed language is overwritten.

Note
This software includes all of the functions required for communica-
tions between the GEOHM
program is included in the online user's manual which can be
accessed from WinProfi.
Programm WinProfi
12
®
C and the PC. A description of the
A Install WinProfi to the PC and Start the Program
Ð
Download the WinProfi software from our homepage:
http://www.gossenmetrawatt.com
(→ Products → Software → Software for Testers → WinProfi)
Ð
Unzip the zip file „winprofi.zip".
Ð
Install the software on your PC by executing file
Setup_WinProfi_Vx.xx.exe.
Ð
Select the desired language for the WinProfi software and for the user
interface of the test instrument.
Ð
Follow the instructions which appear at the monitor.
The program is added to your start menu after installation.
Ð
Establish a connection between your PC and the GEOHM
strument by using interface adapter IrDa-USB converter.
Ð
Start WinProfi.
Ð
Switch on the test instrument.
Ð
Set the on-time period of the GEOHM
enough time for adjusting the settings in WinProfi before the test in-
strument switches off again automatically, see chapter 4.5.
Display or print out online user's manual
The online manual contains information concerning the software which is
not included in these operating instructions.
®
C test in-
®
C to „>>>>>", to give you
GMC-I Messtechnik GmbH