Right Panel; Pedal Board Controls - Viscount Chorale 3 Mode D'emploi

Viscount Chorale 3

RIGHT PANEL

1. Display: graphic display of 128x64 pixels for display of all
the screens relating to the organ's functions.
2. [FIELD ] and [FIELD ] buttons: buttons used to move
the cursor around within the display screens. The [FIELD ]
button moves the cursor to the field above (the one currently
selected) while [FIELD
3. [VALUE +] and [VALUE -] buttons: buttons for adjusting
parameters. [VALUE +] increases the value, [VALUE -]
decreases it.
4. [EXIT] and [ENTER] buttons: buttons for accessing or
exiting menu screens. [ENTER] is used to enter the menu or
function shown on the display or confirm any prompts from
the system. [EXIT] is used to exit the screen on the display
and return to the previous one, or abort any prompts from the
system.

2.4 PEDAL BOARD CONTROLS

1. [MAN. I / PEDAL] pedal: swell pedal used to control the volume of the first manual and pedal
board.
2. [MAN. II] pedal: you can use this swell pedal to control the volume of the second manual.
N.B.
The trimmer volume controls on the left of the manuals allow balancing of the sections; once you
have set the levels best suited to your taste and the sound balance you require, they will not require
frequent adjustment.
The swell pedals, on the other hand, allow continuous control of the volumes, enabling you to
obtain all the dynamic effects you wish. Apart from regulating the volume, the swell pedals also
simulate the variation in timbre of the stops which would occur in the swell boxes of pipe organs.
] selects the field below.
MAN. I / PEDAL
1
46
1
2
MAN. II
2
Owner's Manual
+
ENTER
FIELD VALUE
-
EXIT
VALUE
FIELD
3
4