Yamaha YZ450F Manuel D'atelier Du Proprietaire page 280

1
2
1
2
4 - 20
CARBURETOR
4. Tighten:
• Screw (air cleaner joint) 1
3 Nm (0.3 m · kg, 2.2 ft · lb)
• Screw (carburetor joint) 2
3 Nm (0.3 m · kg, 2.2 ft · lb)
5. Install:
• Throttle cable (pull) 1
4 Nm (0.4 m · kg, 2.9 ft · lb)
• Throttle cable (return) 2
11 Nm (1.1 m · kg, 8.0 ft · lb)
6. Adjust:
• Throttle grip free play
Refer to "THROTTLE CABLE ADJUST-
MENT" section in the CHAPTER 3.
7. Install:
• Throttle cable cover 1
• Screw (throttle cable cover) 2
4 Nm (0.4 m · kg, 2.9 ft · lb)
8. Install:
• TPS (throttle position sensor) coupler 1
• Clamp 2
Refer to "CABLE ROUTING DIAGRAM"
section in the CHAPTER 2.
ENG