Declaration Of Conformity - Mettler Toledo BPA224 Mode D'emploi

9.3

Declaration of conformity

We, Mettler-Toledo (Changzhou) Scale & System Ltd. declare with sole responsibility that the BPA224
scales to which this declaration relates conform to the EU directives and standards stated below.
Directive
Relating to electrical equipment designed for use
within certain voltage limits (73/23/EEC)
Relating to electromagnetic compatibility
(89/336/EEC)
Relating to non-automatic weighing instruments
(90/384/EEC) 1)
1)
Applies only to certified scales (certificate no. T6356).
Mettler-Toledo (Changzhou) Scale & System Ltd.
111 Changxi Rd. Changzhou, Jiangsu 213001, PRC
May 2004
Important note for certified scales in EU countries
Factory-certified scales bear on the packing label the mark shown at left, and a green "M" adhesive label
M
on the certification plate. Such scales may be put into operation immediately.
Scales which are certified in two steps and have no green "M" on the certification plate bear on the packing
M
label the mark shown at left. The second step of certification must be performed by an officially recognized
Mettler-Toledo Service Center or a weights and measures official. Please contact Mettler-Toledo Customer
Service. The first step of verification was performed at the factory of manufacture. It included all tests
according to EN45501-8.2.2.
If the period of validity of the certification is limited by national regulations in the individual member states, the operator
of such a scale himself/herself is responsible for its timely recertification.
METTLER TOLEDO BPA224 Scales
Applicable standard
EN61010-1 (Safety requirements)
EN61326-1:1997 + A1:98 (Class B)
EN61326-1:1997 + A1:98 (minimal
requirements)
1)
EN45501 (Metrological aspects)
[year]
M
[code]
David Zheng Chu Jinlan
President Quality Assurance Manager
1)
17