Accessories; Eliminating Faults - WAGNER WallPerfect PowerRoll System Mode D'emploi D'origine

GB
5 FineLiner complete
6 Paint roll FineLiner
7 Side-frame complete (incl pos. 8, 9, 10)
11 Assembly adapter for FineLiner
12 Extension adapter
Lubricating grease (no fig.)

Accessories

Accessories (not included in the scope of supply)
Designation
Paint roll (nap height 20mm, padded) for rough surfaces and plaster
for further information on the WAGner product range for the renovation sector,
visit www.wagner-group.com

eliminating faults

Malfunction
Device is non-
operational
No coating substance
emerges from the roll
Paint escapes from
the device
22
Spare parts list (fig. 20)
cause
1. The power plug is not
inserted.
2. Pump is not switched on.
3. The material hose is kinked.
1. The end of the suction hose
is not in the paint.
2. The suction hose is blocked.
3. No paint in the paint roll
1. Device not correctly cleaned.
2. Seal on roller frame is the
wrong way round
3. Components damaged or
worn.
4. The hoses are damaged.
PowerRoll System
2327 280
2327 281
2327 282
2328 674
2342 401
2315 539
Order no.
0220 324
remedy
1. Insert the power plug.
2. Set the main switch
to "ON" and press the
on/off switch on the
handle.
3. Remove the kink.
1. Immerse the suction
hose completely in the
paint.
2. Clean the suction hose
3. Press the on/off switch.
1. Clean the parts described
in Fig. 17 and 19.
2. Fit the seal the right way
round
3. Replace the relevant
parts.
4. Contact Customer
Service.